SNAP RING FOR SHAFT                    DIN 5417


                                                                                                     

Nominal
dimension 		                                                   RING         GROOVE
Bearing 
Outer dia. 
D		 s Toler- 
ance		 b Toler- 
ance		 d3 Toler- 
ance		 e r 
min.		 Coefficient 
    K 
(kg x mm)		 Weight 
(kg/1,000)		 d2 Toler- 
ace		 m Toler- 
ance
30 1.12 -0.1 3.25 -0.15 27.6 +0.2 3 0.5 3200 2.78 28.17 -0.25 1.35 +0.3
32 1.12 -0.1 3.25 -0.15 29.6 +0.2 3 0.5 3000 2.98 30.15 -0.25 1.35 +0.3
35 1.12 -0.1 3.25 -0.15 32.5 +0.2 3 0.5 2800 3.22 33.17 -0.25 1.35 +0.3
37 1.12 -0.1 3.25 -0.15 34.1 +0.2 3 0.5 2660 3.36 34.77 -0.25 1.35 +0.3
40 1.12 -0.1 3.25 -0.15 37.1 +0.2 3 0.5 2420 3.60 38.10 -0.25 1.35 +0.3
42 1.12 -0.1 3.25 -0.15 39.0 +0.3 3 0.5 2340 3.75 39.75 -0.25 1.35 +0.3
47 1.12 -0.1 4.04 -0.15 43.7 +0.3 4 0.5 2560 5.30 44.60 -0.25 1.35 +0.3
50 1.12 -0.1 4.04 -0.15 46.7 +0.3 4 0.5 2430 5.78 47.60 -0.25 1.35 +0.3
52 1.12 -0.1 4.04 -0.15 48.7 +0.3 4 0.5 2340 5.92 49.73 -0.25 1.35 +0.3
55 1.12 -0.1 4.04 -0.15 51.4 +0.4 4 0.5 2200 6.17 52.60 -0.25 1.35 +0.3
55* 1.70 -0.1 4.04 -0.15 51.4 +0.4 4 0.5 7700 9.39 52.60 -0.25 1.90 +0.3
56 1.12 -0.1 4.04 -0.15 52.4 +0.4 4 0.5 2180 6.45 53.60 -0.25 1.35 +0.3
58 1.12 -0.1 4.04 -0.15 54.4 +0.4 4 0.5 2100 6.67 55.60 -0.25 1.35 +0.3
62 1.70 -0.1 4.04 -0.15 58.4 +0.4 4 0.5 6900 10.50 59.61 -0.25 1.90 +0.3
65 1.70 -0.1 4.04 -0.15 61.4 +0.4 4 0.5 6600 11.00 62.60 -0.25 1.90 +0.3
68 1.70 -0.1 4.85 -0.15 63.5 +0.4 5 0.7 7500 12.60 64.82 -0.50 1.90 +0.3
72 1.70 -0.1 4.85 -0.15 67.5 +0.4 5 0.7 7100 14.70 68.81 -0.50 1.90 +0.3
75 1.70 -0.1 4.85 -0.15 70.5 +0.4 5 0.7 6700 15.30 71.83 -0.50 1.90 +0.3
80 1.70 -0.1 4.85 -0.15 75.5 +0.4 5 0.7 6400 16.30 76.81 -0.50 1.90 +0.3
85 1.70 -0.1 4.85 -0.15 80.3 +0.5 5 0.7 6100 17.50 81.81 -0.50 1.90 +0.3
90 2.46 -0.1 4.85 -0.15 85.3 +0.5 5 0.7 17400 26.60 86.79 -0.50 2.70 +0.3
95 2.46 -0.1 4.85 -0.15 90.3 +0.5 5 0.7 16400 28.20 91.82 -0.50 2.70 +0.3
100 2.46 -0.1 4.85 -0.15 95.3 +0.5 5 0.7 15500 29.20 96.80 -0.50 2.70 +0.3
110 2.46 -0.1 4.85 -0.15 105.3 +0.5 5 0.7 14300 32.80 106.81 -0.50 2.70 +0.3
115 2.46 -0.1 4.85 -0.15 108.6 +0.5 5 0.7 13600 34.40 111.81 -0.50 2.70 +0.3
115* 2.82 -0.1 7.21 -0.15 108.6 +0.5 7 0.7 30100 56.80 110.20 -0.50 3.10 +0.3
120 2.82 -0.1 7.21 -0.15 113.6 +0.5 7 0.7 29000 60.60 115.21 -0.50 3.10 +0.3
125 2.82 -0.1 7.21 -0.15 118.6 +0.5 7 0.7 28000 63.00 120.22 -0.50 3.10 +0.3
130 2.82 -0.1 7.21 -0.15 123.5 +0.6 7 0.7 27000 65.60 125.22 -0.50 3.10 +0.3
140 2.82 -0.1 7.21 -0.15 133.5 +0.6 7 0.7 25000 70.60 135.23 -0.50 3.10 +0.3
145 2.82 -0.1 7.21 -0.15 138.5 +0.6 7 0.7 24000 73.00 140.23 -0.50 3.10 +0.3
150 2.82 -0.1 7.21 -0.15 143.5 +0.6 7 0.7 23500 77.20 145.24 -0.50 3.10 +0.3
160 2.82 -0.1 7.21 -0.15 153.5 +0.6 7 0.7 22000 81.00 155.22 -0.50 3.10 +0.3
170 3.10 -0.1 9.60 -0.15 161.8 +0.6 10 0.7 36000 122.00 163.65 -0.50 3.50 +0.3
180 3.10 -0.1 9.60 -0.15 171.8 +0.6 10 0.7 34500 128.00 173.66 -0.50 3.50 +0.3
190 3.10 -0.1 9.60 -0.15 181.6 +0.7 10 0.7 32800 139.00 183.64 -0.50 3.50 +0.3
200 3.10 -0.1 9.60 -0.15 191.6 +0.7 10 0.7 31200 148.00 193.65 -0.50 3.50 +0.3
210 3.10 -0.1 9.60 -0.30 201.6 +0.7 10 1.2 29800 156.00 203.60 -0.50 3.50 +0.3
215 3.10 -0.1 9.60 -0.30 206.6 +0.7 10 1.2 28800 165.00 208.60 -0.50 3.50 +0.3
225 3.50 -0.1 10.00 -0.30 215.0 +0.7 10 1.2 41400 195.00 217.00 -0.50 4.50 +0.4
230 3.50 -0.1 10.00 -0.30 220.0 +0.7 10 1.2 40600 200.00 222.00 -0.50 4.50 +0.4
240 3.50 -0.1 10.00 -0.30 230.0 +0.7 10 1.2 39200 208.00 232.00 -0.50 4.50 +0.4
250 3.50 -0.1 10.00 -0.30 240.0 +0.7 10 1.2 37300 217.00 242.00 -0.50 4.50 +0.4
260 3.50 -0.1 10.00 -0.30 249.0 +0.8 10 1.2 36200 226.00 252.00 -0.50 4.50 +0.4
270 3.50 -0.1 10.00 -0.30 259.0 +0.8 10 1.2 34800 234.00 262.00 -0.50 4.50 +0.4
280 3.50 -0.1 10.00 -0.30 269.0 +0.8 10 1.2 33500 243.00 272.00 -0.50 4.50 +0.4
290 3.50 -0.1 10.00 -0.30 279.0 +0.8 10 1.2 32300 252.00 282.00 -0.50 4.50 +0.4
300 4.50 -0.2 12.00 -0.30 286.0 +0.8 10 1.5 79500 394.00 290.00 -0.50 5.50 +0.5
310 4.50 -0.2 12.00 -0.30 296.0 +0.8 10 1.5 77000 407.00 300.00 -0.50 5.50 +0.5
320 4.50 -0.2 12.00 -0.30 306.0 +0.8 10 1.5 74700 420.00 310.00 -0.50 5.50 +0.5
340 4.50 -0.2 12.00 -0.30 326.0 +0.9 10 1.5 70200 446.00 330.00 -0.50 5.50 +0.5
350 4.50 -0.2 12.00 -0.30 345.0 +0.9 10 1.5 66000 473.00 350.00 -0.50 5.50 +0.5
370 4.50 -0.2 12.00 -0.30 355.0 +0.9 10 1.5 64000 486.00 360.00 -0.50 5.50 +0.5
380 4.50 -0.2 12.00 -0.30 365.0 +0.9 10 1.5 63000 498.00 370.00 -0.50 5.50 +0.5
400 4.50 -0.2 12.00 -0.30 385.0 +0.9 10 1.5 60100 525.00 390.00 -0.50 5.50 +0.5
 

Material : Spring steel HV 450 to 520 kg/mm2 or HRc 45 to 50
* According to DIN 5417, dated Aug.1942
Up to Sp 250 the rings listed above correspond to DIN 5417, sheet No.3, dated April 1959 which is in accordance
with the recommendations of the Technical Committee ISO/TC 4 'Ball and Roller Bearings'

The circlips above 250 mm are in accordance with recommendations by the 'Committee for Antifriction Bearings".
The differences in dimensions between the old rings of DIN 5417, dated Aug.' 42 and the new issue are so small
(except Sp 55 and Sp 115) that they can be interchanged. For rings Sp 55 and Sp 115 both dimensions are given.

Product's page

Designed & Hosted by : MID   Promoted by : GID