GRIP RING FOR SHAFT WITHOUT GROOVE DIN 5555
| Nominal dimension |
RING |
||||||
|
Shaft dia |
s | d3 | a
~ |
b
~ |
d5 | Weight
(kg /1,000) |
Max.load (kg) |
| 1.5 | 0.40 | 1.40 | 1.7 | 0.7 | 0.9 | 0.02 | 4.0 |
| 2.0 | 0.60 | 1.90 | 1.7 | 1.0 | 0.9 | 0.03 | 5.0 |
| 2.5 | 0.60 | 2.35 | 1.7 | 1.2 | 0.9 | 0.04 | 6.0 |
| 3.0 | 0.60 | 2.85 | 1.9 | 1.4 | 0.9 | 0.05 | 7.5 |
| 3.5 | 0.60 | 3.30 | 2.1 | 1.6 | 0.9 | 0.08 | 9.0 |
| 4.0 | 0.80 | 3.80 | 2.7 | 1.8 | 1.3 | 0.17 | 10.0 |
| 4.5 | 0.80 | 4.25 | 3.0 | 2.0 | 1.3 | 0.22 | 12.0 |
| 5.0 | 0.80 | 4.75 | 2.6 | 2.2 | 1.3 | 0.26 | 13.0 |
| 6.0 | 1.00 | 5.70 | 3.0 | 2.5 | 1.3 | 0.38 | 17.0 |
| 7.0 | 1.00 | 6.70 | 3.2 | 2.8 | 1.3 | 0.48 | 18.0 |
| 8.0 | 1.20 | 7.70 | 3.3 | 3.0 | 1.3 | 0.55 | 20.0 |
| 9.0 | 1.20 | 8.65 | 3.0 | 3.3 | 1.5 | 0.75 | 23.0 |
| 10.0 | 1.20 | 9.65 | 3.0 | 3.5 | 1.5 | 0.96 | 25.0 |
| 11.0 | 1.20 | 10.60 | 3.6 | 4.2 | 1.7 | 1.25 | 28.0 |
| 12.0 | 1.20 | 11.60 | 3.6 | 4.7 | 1.7 | 1.50 | 30.0 |
| 13.0 | 1.20 | 12.55 | 4.0 | 5.0 | 1.7 | 1.80 | 32.0 |
| 13.8 | 1.50 | 13.30 | 4.6 | 5.4 | 2.0 | 2.65 | 35.0 |
| 14.0 | 1.50 | 13.50 | 4.6 | 5.4 | 2.0 | 2.60 | 35.0 |
| 15.0 | 1.50 | 14.50 | 4.8 | 5.7 | 2.0 | 2.80 | 40.0 |
| 16.0 | 1.50 | 15.40 | 4.9 | 5.9 | 2.0 | 3.20 | 50.0 |
| 17.0 | 1.75 | 16.35 | 6.0 | 6.3 | 2.5 | 4.80 | 60.0 |
| 18.0 | 1.75 | 17.30 | 6.0 | 6.7 | 2.5 | 5.20 | 70.0 |
| 20.0 | 1.75 | 19.30 | 6.0 | 7.1 | 2.5 | 6.00 | 75.0 |
| 22.0 | 1.75 | 21.20 | 6.0 | 7.4 | 2.5 | 6.50 | 80.0 |
| 24.0 | 1.75 | 23.15 | 6.5 | 7.8 | 2.5 | 6.80 | 85.0 |
| 25.0 | 1.75 | 24.15 | 6.5 | 8.2 | 2.5 | 7.00 | 90.0 |
Material : Spring steel HRc = 46 to 51 or HV = 470 to 540 Kg/mm2
The grip rings are manufactured as illustrated on the right hand side
of the sketch except those
marked with an asterisk. The rings marked with an asterisk * are made as shown on the left hand
side of the sketch. When new punching tools have been manufactured conversion to the design
without holes will be made.